Information
| Cleanroom Partitions |
 |
Features/Benefits
-
Melamine or laminate surfaces ideally suited to the demands of controlled areas, laboratories and food preparation areas.
-
System has been designed to achieve from class 10,000—class 1,000 and above when built in accordance with planned filtration systems.
-
Flush components finished in powder coated paint to any BS or RAL specification.
-
Various glazing options
-
Matching door finishes available
-
Laboratory furniture and benching available
-
Trespa worktops available
-
Monobloc construction
-
Fire-rated option
-
Sealed V joints
-
Skirting options
-
Wipe clean/durable surfacesNon particle shedding finish
System Description
Smooth wipeable panel surfaces are achieved through the use of melamine or laminate panels. These surface options, combined with a strong monobloc partition, make the montage product a highly competitive and appropriate solution to the specialist demands of this sector. The product is therefore widely used for clean rooms, laboratories and food processing areas.
Panels are delivered to site with either a melamine, laminate or smooth pvc vinyl finish. The butt joint gives the effect of a solid wall; Silicon mastic between the joints ensure that the highest standards of cleanliness can be achieved.
Panel Composition & Manufacture
Panels are made from 625 kg/m3 density chipboard and are a combination of a flax and chipboard. The chipboard panel itself is made from particles bonded with resin. Cable management, permitting hidden wireways , is available by using the internal cavities within the panels.
Profiles
These are made from aluminium and are consequently inert and non-toxic. The material melting point is 660 degrees centigrade. Finishes are either satin anodised or powder coated to BS or RAL standards.
Finishes
Either pure pvc vinyl made from polyurethane coated polymid fabric or melamine provide a smooth surface which is easily wiped. For resistance to moisture and most acids, laminate is the ideal solution. All surface finishes offered are non-shedding.
Glazing Options
Smooth thermoplastic rubber glazing gaskets can be supplied. Single or double aluminium beading is available as well as a double glazed silicon sealed unit to meet the highest clean room specifications.
Module Dimensions (in single tier)
-standard heights are 2.4m, 2.7m, 3.0m and 3.6m
-standard width is 1.2m
Fire Resistance
The system can be upgraded without altering the product appearance, to achieve the half hour rating in accordance with BS 467 part 22.
Thermal Resistance
Typical values are U:1.08 W/M2K, assuming rockwool is inserted within the panel.
Weight Loading
Tested against the criteria of BS 5268 (part 2) the panels withstood loads of 250 kilos per linear meter run.
Site Work
The monobloc construction and the pre-decoration of the panels reduces site work considerably. The system becomes airtight after the silicone mastic of the panel joints is applied at site by the installer. Foam seals fitted to profiles and covered skirtings assist the elimination of dirt and dust. Door units, using laminate leaves made in the montage factory, can be supplied in a range of colours to match the panels.
Product Images
|
|
The System for Controlled Environments